Microsens RS232 Dokumentacja Pobierz pdf (Strona 27)

4 Port Industrial Device Server Manual page 27/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

Label

Description

Serial to Ethernet

Flush Data Buffer After:

The received data will be queued in the buffer until all the delimiters

are matched. When the buffer is full (4K Bytes) or after "flush S2E

data buffer" timeout, the data will also be sent. You can set the time

from 0 to 65535 seconds.

Delimiter:

You can define max. 4 delimiters (00~FF, Hex) for each way. The data

will be hold until the delimiters are received or the option “Flush

Serial to Ethernet data buffer” times out. 0 means disable. Factory

default is 0

Ethernet to serial

Flush Data Buffer After:

The received data will be queued in the buffer until all the delimiters

are matched. When the buffer is full (4K Bytes) or after "flush E2S

data buffer" timeout, the data will also be sent. You can set the time

from 0 to 65535 seconds.

Delimiter:

You can define max. 4 delimiters (00~FF, Hex) for each way. The data

will be hold until the delimiters are received or the option “Flush

Ethernet to Serial data buffer” times out. 0 means disable. Factory

default is 0

Service Mode – Virtual COM Mode

In Virtual COM Mode, the driver establishes a transparent connection between host

and serial device by mapping the Port of the serial server serial port to local COM

port on the host computer. Virtual COM Mode also supports up to 5 simultaneous

connections, so that multiple hosts can send or receive data by the same serial

device at the same time.

The following table describes the labels in this screen.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Brak uwag

Microsens RS232 Dokumentacja Strona 27